FRP bypass Redmi Mi Xiaomi

FRP bypass Redmi Mi Xiaomi, How to unlock mi account, mi frp , mi 4, mi 4a,mi 4x,mi 4l and all mi

  • Mi Account Remove TPS Xiaomi Tool Free Download

Xiaomi Mi A1 Bypass Google Account Latest 2018 method, Only you need download “Mi PC Suite” as well “Mi FRP Removal Tool”, and then you can easily bypass google verification on Xiaomi Mi A1 device. This method is only device owner.

 

Note: This method has successfully been applied on Xiaomi Mi A1, Android 7.1.2, Sec Patch 1st Aug 2017.

Download Xiaomi Mi Tools in Computer:

⇒ Mi Setup 2.2.0 [DOWNLOAD]

⇒ Xiaomi A1 FRP Tool V1.0 [DOWNLOAD]

-Install “Mi Setup 2.2.0” in your computer.

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

-Turn of “Antivirus” or “Real time protection” from your computer.

-Extract “Xiaomi A1 FRP Tool V1.0” from winrar archive.

-Go to extracted folder.

 

Let’s Begin Xiaomi Mi A1 Bypass Google Account:

-Switch off Xiaomi Mi A1 device.

-Press & Hole (Volume UP + Power Key) together until you see “Fastboot Mode”.

-Now connect your device to computer via “Micro USB Cable”.

-Right click on “My Computer” icon, and then click on “Manager”, after that click on “Device Manager”.

-From there, verify that your “Xiaomi” device has successfully been detected by computer.

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

 

Open Xiaomi A1 FRP Tool V1.0:

-Right click on “Xiaomi A1 FRP Tool V1.0” and run as administrator (see below image).

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

 

-After that, command prompt window will open, and wait once green screen appears up.

-Press any key from your keyboard to Xiaomi Mi A1 Bypass Google Account.

-After that, it will auto reboot your device.

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

 

-Now disconnect your device.

-Tap on >SKIP > Set up as new > SKIP.

-Complete initial setup to Xiaomi Mi A1 Bypass Google Account.

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

 

Add Gmail Account & Factory Data Reset:

-Once you access to your device “HOME SCREEN”.

-From there go to > Settings > Account > Add Account > Google.

-Add your new gmail account there.

-After that, again go to > Settings > Backup & Reset > Factory Data Reset > Reset Phone.

Xiaomi Mi A1 Bypass Google Account, Unlock FRP Mi A1, Remove Google Account Xiaomi Mi A1, Bypass Xiaomi Android 7.1.2

 

-Now it will reset your device, and then again complete initial setup, if it ask you to sign in with gmail account, just give the gmail id that you have added already.

GSM JONY FRP Tool FRP Unlock Tool 2018

GSM JONY FRP Tool FRP Unlock Tool 2018, Download & install the latest version of Samsung FRP Unlock Tool Pro By GSM Jony for Windows Computers. Here you can download Samsung FRP Unlock Tool Pro By GSM Jony tool most recent update from this blog, it is free to download & it helps you to quickly bypass Samsung FRP just one click to bypass Samsung Smartphones FRP, to download Samsung FRP Unlock Tool Pro By GSM Jony tool follow the download link which is given at the end of this page.

GSM JONY FRP Tool FRP Unlock Tool 2018

And most Brands making your SmartPhones have implemented it in their models. It’s a great thing, it makes a theft Smartphones harder to use,  which makes it less appealing to thieves & Whatever we can secure our data on lost SmartPhones.

S8 Not Charging After Getting Wet

S8 Not Charging After Getting Wet

S8 Not Charging After Getting Wet

If your phone keeps showing moisture detected error, we have a few fixes for you to try below. This error message usually shows up if the system detects moisture or water in the USB charging port. It doesn’t mean that the phone is damaged. It only indicates that the device blocks charging via USB charging port to prevent shorting other components.

  • Moisture Detected Fix #1

With that said, usually, this error occurs when you are charging your phone while the phone is off.  As simple as this may sound, but simply turn on your phone first (or reboot your phone) and then plug in the charger.  It’s simple as that.  The moisture detected error typically show up when you try to charge the phone while the phone is off.

  • Moisture Detected Fix #2

If your phone is out of battery and you cannot turn on the phone first prior to charging, then try holding the power button and volume down at the same time, and while holding both buttons, plug in the charger, you should see phone load up with the last bit of juice.

  • Moisture Detected Fix #3

And if you’re still getting the error, the last thing you can do is to take advantage of the wireless charging function.  You would likely have to pick up a new wireless charger if you don’t already have one.

  • Moisture Detected Fix #4

Here’s a low tech solution, take a Q-Tip and clean around the charging USB port to make sure it’s completely dry and dust free.  Also, try using a blow dryer at low heat to blow around and dry out the area.  You might think this is so obvious and simple, but it has worked for several of our readers!

  • Moisture Detected Fix #5

By the way, you may continue to get this error over and over, even if your phone has not come near any water in days.  What we’ve found is that you can try this:

  1. go to apps settings
  2. go to system apps
  3. USB Settings
  4. Storage
  5. clear data
  6. reboot phone

comment below if this helps!

S8 Moisture Has Been Detected Error Even If Phone Is Not Wet

S8 Moisture Has Been Detected Error Even If Phone Is Not Wet

S8 Moisture Has Been Detected Error Even If Phone Is Not Wet

 

this is what I did by a freak chance and it seems to be working in the meantime.

  1. 1. plug in your s8 to the charger (you will be notified that there is moisture detected)
  2. 2. restart your s8 (make sure not to remove the charging cable)
  3. 3.  make sure it shows how long until full charge.
  4. 4. You have by successfully bypassed the moisture error.

 

Moisture can be built up from the humid air in some regions with proper conditions.

So, a few owners of Galaxy S8 and S8+ may get the moisture problem even if the phone was not in touch with water.

If this is the case, you can use the hairdryer (choose cool air if possible) to dry the port.

How to avoid Galaxy S8 moisture problem?

If your Galaxy S8 or S8+ was in contact with seawater or water in swimming pool, you should rinse the USB port with tap water or pure drinking water as early as possible.

After rinsing the charging port, if possible, you can use a hairdryer to dry it.

I checked the USB port. It is dry. Why do I still get the Galaxy S8 moisture problem?

First, the moisture sensor in some Galaxy S8 or S8+ may be oversensitive. Some corrosion or even dirt may be detected as moisture.

If this is the case, you can use clean wipes, or tissue, to clean the port. It is better to power off Galaxy S8 and S8+ to do the cleaning work.

The second possible cause of the Galaxy S8 moisture problem is the software/data caching. In this case, you can try to clear USB settings data (read on).

Samsung FRP TOOL

Samsung FRP TOOL

Samsung FRP TOOL

How to use Samsung FRP TOOL

How to Open Download Mode

  1. Turn your phone off.
  2. Now, press three buttons: Volume Down + Home Button + Power Button at the same time. Make sure you press them at the same time.
  3. You will see a warning message on your screen. As soon as you see the warning display, leave the buttons.
  4. Press the Volume UP button of your phone to enter the Download Mode.

So you have successfully entered the Download mode. Follow the further steps to bypass FRP Lock.

Alternative Method to Bypass FRP Online (Paid)

If above given FRP bypass method will not work for you then you can try below-given the website to bypass your phone’s FRP Lock. But you have to Pay a little amount for this.

Unlock FRP Online

Steps to Install Drivers For Your Phone.

  1. Install USB Drives on your pc or laptop and connect your phone to pc with a cable.
  2. On the My Computer icon, do a right-click on the mouse and click properties from the list.
  3. Click on Device Manager.
  4. Your phone must be connected to pc/laptop. After clicking on Device Manager, check that your phone is successfully connected or not.

How to Bypass FRP by using Octopus Software.

  1. After installing the Octopus, open it and click on Support and Options.
  2. In the Phone Model Tab, select your Samsung phone model and click on Select.
  3. In the Actions tab, click on Reset FRP option. It is present somewhere in the last three positions.
  4. A popup will appear now. You will see a message as ADB must be enabled. You can try to enable it. Simply click on OK.
  5. In the Log section of the app, there will be a message in the end: Searching for the phone(Waiting for ADB device.). Then click on Cancel button from Actions tab and then on Reset FRP/Reactivations button in the Actions tab.
  6. Again a pop-up will appear. There will be a message: Reset FRP/Reactivations Lock operation for Samsung….
  7. Click on Yes option and wait for some seconds. In some seconds, the Factory Reset Protection lock will be removed from your device.

Download Samsung FRP TOOL

 

can’t connect Bluetooth for this call

can’t connect Bluetooth for this call

can’t connect Bluetooth for this call

You are facing can’t connect Bluetooth for the school that’s mean you have the latest security update version three in android version 7.1.10 7.1 .230 bring latest challenges who have to unlock FRP lock factory reset protection to lock in the android mobile phone.

There is many challenges, first of all, you cannot download the downgraded from here and you cannot even finish your ROM to downloaded version if you try to downgrade android version then you will see boot loader errors. . in that get only one method of working perfectly which is a combination camera update after combination friend then you can unlock your device easily.

Can you see below link tutorial to unlock your device it has given all the required role in the description and has also a step-by-step tutorial how to unlock your device when you are saying can’t connect to Bluetooth for this call.

Combination Firmware method Bypass Google account verify FRP lock

 

 

How to Remove FRP via ADB Command ADB Bypass FRP Tool

GSM Flasher ADB Bypass FRP Tool.zip

Download GSM Flasher ADB Bypass FRP Tool 2018 Latest Version

 

Remove FRP Via ADB Command

adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
adb shell am start -n com.google.android.gsf.login/
adb shell am start -n com.google.android.gsf.login.LoginActivity

This will Wipe your cellphone

fastboot -w

If Above Command not works, then use this command this will delete user configurations on your phone.

fastboot erase config

If Above Command not Working Then use this command

fastboot -i 0x2a96 erase config

Remove FRP From SPD and MTK Based Android Phones?

adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1

If above not working then try this command

adb shell am start -n com.google.android.gsf.login/

If above not working then try this command

adb shell am start -n com.google.android.gsf.login.LoginActivity

How to put Samsung on adb fastboot

You can use Samsung calculator to open a TV setting and select ADB and your device after reporting your device you can connect your device into the PC and above command.

Samsung usb driver for windows 32/64 bit free download

samsung usb driver for windows 7 32 bit free download

Samsung USB driver for windows 7 32 bit free download

Download

Wikisir FRP Unlocker tool for Nougat

Do you really want to unlock you Samsung locked device? Is your device running android Nougat 7.0 than it is right to post for the solution for the lock device?

Wikisir FRP Unlocker tool

How to use Wikisir FRP Unlocker tool for Nougat

  1. Download Minimal ADB and Fastboot Tool (latest versions) adb.exe
  2. ADB Commands
    • adb shell content insert --uri content://settings/secure --bind name:s:user_setup_complete --bind value:s:1
    • adb shell am start -n com.google.android.gsf.login/
    • adb shell am start -n com.google.android.gsf.login.LoginActivity
  3. Download Wikisir FRP Unlocker tool

WikiSir FRP unlocker tool

How to flash Xiaomi Mi device Stock Rom Flashing Tutorial

How to unlock

Xiaomi Mi A1 Stock Rom Flashing Tutorial

Download Xiaomi Mi A1 Stock Rom

Download MiFlash Tool

——————————————————————————– Important Before

Flashing :

1. Make sure to turn on USB Debugging on Xiaomi Mi A1 : –

Go to setting – About Phone – Tap 7 Times on Build Number. This will Enable Developer Options Now Go back to settings Menu. Click on Developer options – Enable USB Debugging.

2. Unlock Bootloader : –

see this post : https://en.miui.com/thread-652939-1-1…. 3.

Disable Driver Signature

Go to Start Menu and go to “All Programs”, then “Accessories”, right click your mouse on “Command Prompt” and “Run as administrator”, as shown below:-

  1. bcdedit.exe -set load options DDISABLE_INTEGRITY_CHECKS
  2. bcdedit.exe -set TESTSIGNING ON

Enable Driver Signature Enforcement

  1. bcdedit.exe -set load options ENABLE_INTEGRITY_CHECKS
  2. bcdedit.exe -set TESTSIGNING OFF

See this post : https://en.miui.com/thread-237673-1-1…. ——————————————————————————– About Xioami Mi A1 Stock Rom :

1. It is official Stock rom based on Pure Stock Android

2. This is not a miui rom it is stock android rom which comes preinstalled with the phone.

3. it is stock rom will receive oreo update ? – yes it will receive all updates

4. Xiaomi Mi A1 Oreo Update when it is able ? – by the end of this year

1 2